Built-in limit switches
Refer to the switching diagram for the selected configuration when planning the control system.
Products / Electric Linear Actuators / FB605
View mounting detail ＋
PRODUCT OVERVIEW
FB605
Electric Linear Actuator
A brushed DC electric linear actuator for industrial applications, with built-in limit switches and optional position feedback.
MAX. LOAD12,000 N
NO-LOAD SPEED6.5–68 mm/s
IP RATINGIP66
Load and speed depend on the selected configuration.
TECHNICAL DATA
Technical Specifications
- Load / Force
- Up to 12,000 N
- Stroke
- 50–1000 mm
- Input Voltage
- 12 / 24 / 36 / 48 V DC
- No-load Speed
- 6.5–68 mm/s
- Feedback Type
- POT / Hall sensors / magnetic switch / 0–10 V analogOptional; no-feedback configurations are also listed.
- IP Rating
- IP66
- Motor Type
- Brushed DC motor
The performance table below covers 12 V and 24 V configurations. Contact Fergus for 36 V / 48 V performance data and duty-cycle conditions.
Load–speed configuration table · 12 / 24 V DC ＋
| Code | Max. load (N) | No-load speed (mm/s) | Full-load speed · 12 V (mm/s) | Full-load speed · 24 V (mm/s) |
|---|---|---|---|---|
| A | 12,000 | 6.5 | 4.8 | 5 |
| B | 10,000 | 13 | 7.5 | 9.5 |
| C | 7,000 | 17 | 10 | 13 |
| D | 5,000 | 25 | 15 | 18 |
| E | 6,500 | 20 | 11.5 | 14.5 |
| F | 3,200 | 38 | 26 | 30 |
| G | 2,000 | 68 | 40 | 46 |
Read each speed with its configuration code, load condition and voltage. The highest load and speed are from different configurations.
PRODUCT DESIGN
Key Features
Position feedback options
Review the available feedback type and electrical interface against your equipment control requirements.
Options & Customisation
Available options
- Front and rear attachment variants
- Cable length options
- Control box / manual control options
Subject to engineering review
- Custom stroke requests
- Custom cable length
- Signal feedback options
Confirm the complete configuration and electrical compatibility before ordering.
Dimensions & Drawings
Original dimensional drawing from the FB605 English datasheet. Click the drawing to enlarge and inspect the dimensions.
View attachment drawings
The source figures show alternative attachments. Confirm the required front and rear configuration with Fergus.
Confirm the drawing and installation geometry for your selected stroke and attachment configuration before finalising your equipment design.
Discuss Your Installation RequirementsAPPLICATION REFERENCES
Motion in Real Equipment
01 / MOBILE CATERING
Serving Hatch Actuation
Two linear actuators, one on each side, open and close the upward-hinged serving hatch on a catering trailer.
02 / MOBILE LIGHTING
Mobile Light Towers
Electric actuation for mast lifting and positioning, and for adjustment of the equipment body on mobile light towers.
03 / AGRICULTURE
Agricultural Machinery
Electric positioning of adjustable mechanisms on agricultural equipment. The installation shown adjusts a discharge chute deflector through a hinged linkage.
Application suitability depends on the actuator configuration, installation geometry and operating conditions. Contact Fergus for technical evaluation.
Downloads & Technical Support
Download the complete FB605 English datasheet, including technical specifications, dimensional drawings and attachment options.
English · PDF · 6 pages · 643 KB
Discuss Your Application
Tell us about your application, operating requirements and expected quantity. Our team will help you evaluate a suitable configuration.